Intel Thunderbolt Dock software not working on Windows 11/10

Download PC Repair Tool to quickly observe & prepare Windows errors automatically

In today's postal service, we volition explore why devices connected through Intel Thunderbolt Dock software stops working after the Windows 11/10 computer resumes from the S5 power state. Thunderbolt was developed past Intel and offers high-bandwidth information transfers between devices, with maximum transfer rates of 40Gbps (or 5GB/s) available.

You should know that USB-C and Thunderbolt both utilize the aforementioned reversible port. While a USB-C port and Thunderbolt port await the same, Thunderbolt has some actress hardware compared to the more widely-adopted USB-C.

It's important to know, too, that your USB-C accessories and cables will work with a Thunderbolt port. All Thunderbolt ports are also USB-C ports. However, non all USB-C ports are as well Thunderbolt ports.

In the S5, or shutdown, state, the automobile has no retention state and is not performing any computational tasks.

The only difference between organization power states S4 and S5 is that the computer can restart from the hibernate file in land S4, while restarting from country S5 requires rebooting the system.

State S5 has the following characteristics:

• Power consumption: Off, except for trickle current to devices such as the power button.
• Software resumption: Kicking is required upon awakening.
• Hardware latency: Long and undefined. Only physical interaction, such as the user pressing the ON switch, returns the system to the working state. The BIOS can also awaken from a resume timer if the system is so configured.
• Organisation hardware context: None retained.

Thunderbolt software non working on Windows 11/10

On a Thunderbolt Dock, several devices, such equally a keyboard, mouse, and USB encryption fundamental, are fastened. If you lot take enabled Fast Startup on a Windows figurer and do the following:

1. Y'all repeatedly connect the Thunderbolt Dock to the calculator. Devices on the Thunderbolt Dock are enumerated.
2. Y'all press the power button to put the system into a Soft Off (S5) power state. A
3. After the screen turns off, y'all remove the Thunderbolt Dock and wait for the S5 process to terminate and plug in the Thunderbolt Dock
4. You wait 5 seconds for the Thunderbolt Dock to become idle.
5. So, you power on the computer and you check whether the mouse, keyboard, and USB primal are functional.

In this scenario, in that location is a 5 percent failure rate for all the devices that are attached to the Thunderbolt Dock. In this situation, the devices stop working even if they are listed in the Device Managing director.

When the failure occurs, the functionality of the devices cannot be restored by re-attaching the Thunderbolt Dock.

To resolve this upshot, Microsoft recommends that you lot restart the Windows computer.

That's it!

Obinna Onwusobalu, has studied Information & Communication Technology and is a nifty follower of the Windows ecosystem. He runs a computer software clinic. He says it'due south all-time practise to create a System Restore Point before making whatsoever changes to your PC.

Source: https://www.thewindowsclub.com/thunderbolt-dock-software-not-working-on-windows-10

Posted by: charonpree1959.blogspot.com

Share this post